THYOSIL MFP350
Flow modifier 流動改性劑

Description描述

THYOSIL MFP350 is an acrylic resin specially developed to improve flow and impact resistance in clear PC (Polycarbonate) and blends, allowing resins to flow without migration. For its properties is commonly used to reduce injection molding fill pressures and fill times. THYOSIL MFP350 allows high performance plastics to be formulated with higher loadings of inerts, such as fire retardants, colorants or mineral fillers.

THYOSIL

MFP350是一種專為改進透明PC（聚碳酸酯）和共混物中的流動性和抗沖擊性而開發(fā)的丙烯酸樹脂，允許樹脂流動而不遷移。 由于其特性通常用于減少注塑成型的填充壓力和填充時間。THYOSIL MFP350允許高性能塑料配制成更高負載的惰性物質，如阻燃劑，著色劑或礦物填料

Advantages 優(yōu)勢

ü       Maintains transparency.?保持透明度。

ü       Good heat resistance.?良好的耐熱性。

ü       Does not need to use solvents.不需要使用溶劑

ü       Keeps flow at lower process temperature.在低加工溫度保持良好的流動性

ü       Reduce internal stress.?減輕內部應力。

ü       High retention of mechanical properties. 機械性能維持不變。

Typical Properties典型值

These properties are typical, do not constitute specifications

Dosage用量

THYOSIL MFP350 is used at 1-5% in polycarbonate. 1-5%用于 PC

Dossing 3% THYOSIL MFP350 increased flow will be 20 to 25%.

 1-5%用于 PC ， 3% 可以提高20-25的流動性

Safe handling Information

Before using this product, read carefully the Material Safety Data Sheet (MSDS).

Note: The statements above are based on the current state of knowledge. They are intended to describe the product in relation to necessary safety precautions, and should not be used as a warranty of any specific property. Revision: March 2017.